+86-750-3882671
+86-138-2233-1726
Usage of wax removal environmental cleaning agent
Generally, it needs to be heated to above 60 ℃ for soaking or ultrasonic cleaning, and the wax scale can be cleaned in one to ten minutes.
适用范围广，不锈钢制品、铜、铝等合金制品均适用，如表带表壳、眼镜架，脚丝，金属配件饰品等；渗进、溶解能力强，除蜡速度快；不含氢氧化钠和无机盐，不伤底材；
使用浓度（百分之2~5）对油污容纳量高，并可做为除.png)
Oil degreasing products have long service life and are economical and practical.
使用方法：配制溶液时，将水加入干净槽中，加热至60℃以上，边搅拌边缓缓加入所需比例的除蜡水，要充分搅拌均匀，升至所需温度（不超过100℃）即可使用。为得到较佳清洗效果，根据清洗对象和脏污程度，将原液与水配制成浓度为百分之5～10的清洗液。加温至60～85℃结合超声波设备清洗3～10分钟后，用纯水漂洗干净后再烘干。采用热浸泡和手工擦拭的方式清洗时，应不断晃动工件，直到洗干净为止。
文章源自：除蜡环保清洗剂 http://www.newstar-china.com
-
04-14
Wax removal environmental cleaning agent: industrial wax removal cleaning agent
During industrial production and processing, various kinds of dirt will be formed on the surface of equipment and workpiece, and these dirt need to be cleaned with corresponding industrial cleaning ag
-
12-13
Dewaxing environmental cleaning agent: how to use dewaxing water and oil powder to clean stainless steel!
How to clean stainless steel with dewaxing water and degreasing powder!During the production of stainless steel products, many different stains will be attached to the surface, but the surface of the
-
11-09
Cyanide free alkali copper: maintenance method for cyanide free copper plating
Maintenance method of cyanide free copper platingWith the development of science and technology, the surface treatment solution is constantly updated. The cyanide free copper plating additive of Renc
-
06-30
Wax removal environmental cleaning agent: industrial wax removal cleaning agent
During industrial production and processing, various kinds of dirt will be formed on the surface of equipment and workpieces, and these dirt need to be cleaned with corresponding industrial cleaning a