Precautions for wax removal environmental cleaning agent:

1. In order to maintain the best cleaning effect, the cleaning workpieces should not overlap each other, and 1-3% wax removal water should be added regularly every day.

2. The same cleaning tank cannot clean the wax scale on the surface of different metal polished workpieces. Due to the different reactivity of different metals, they will have different oxidation effects due to heating during the cleaning process, and different metals will be cleaned in the same cleaning tank. It occurs that the metal ions of the active metal are attached to the surface of the inactive metal. In addition to wax water to clean zinc alloy active workpieces, pay attention that the cleaning time should not be too long, and the cleaning temperature should not exceed 85 degrees Celsius, otherwise the workpiece will be lightly corroded.

3. When the wax scale suspension in the cleaning tank increases significantly and reaches basic saturation, the wax removal cleaning effect is significantly reduced, and it is necessary to add and supplement wax removal water to maintain it. When cleaning workpieces It depends, the general replacement cycle is 2 to 10 days.

4. When the workpiece has heavy oil dirt, it needs to be rinsed in 0.5-1% alkaline water for 30 seconds to 1 minute after cleaning in the wax removal water cleaning tank.

5. After the cleaning solution has been used for a certain period of time, the wax residue in the cleaning tank can be filtered and used again, or it is better to use the filtered cleaning solution as a rough cleaning solution, which can make full use of the cleaning solution to reduce cleaning costs.

The above is the introduction of Xiaobian on the precautions of wax removal and environmental protection cleaning agents.

The article comes from: Wax removal environmental protection cleaning agent

http://www.newstar-china.com